DUT table movement

General info:

Horizontal movement: 1-M-521 DD
Vertical movement: 2-M-511 DD
The numbers are in units of mm.

DEPFET specific: vertical movement: smaller numbers mean movement upwards (and vice versa)
(due to the size of the DEPFET modules the table had to be turned).

Instructions for the start and movement of the table:

• On the Run Control MAC: open the program Chicken of the VNC
  (on the lower taskbar)
• In the Chicken of the VNC program:
  • In "Servers" select "zenpixelw"
  • Click "Connect" (WIN-Screen appears)
• In the WIN-Screen:
• Open the program PI MicroMove(R) (double-click icon on desktop)
• In the program PI MicroMove(R):
• Click "Connect"
• Click "Apply"
• Click "OK"
• Attention: NEVER press on Ref.Switch, as it will go to a far off Reference Position - you don't want that!!!
• Click "Advanced"
• Click "Relative moves only, no range checks"
• Click "Start"
• Click "Yes, relative moves only"
• Click "Close"
• Three window will appear, you can close the 3-M060.DG
• Adjust the step size (it's mm)
• Move the table by clicking on the arrows (one click moves the table by the stepsize)